How To Use Vibrofeel

QUICK START GUIDE

Check all the accessories with Main unit, Probe and power cable.
Now connect the power cable with Unit as well as at mains power plug.
Connect hand piece probe to the main unit’s output socket.
Long Press Power button which will glow in Blue color & Beep Sound when power on.
Place the hand piece at the desired point.
Press Up & Down the button for increase the intensity.
Press reset button reset the intensity to zero
You can stop the output by pressing the check button on the unit or at the hand piece.

METHOD OF APPLICATION

Clean the skin by tissue paper or cotton, preferably wet cotton.
Position the patient in such a way that the application area is well visualized and patient can sit or lay down during the treatment. The ease of patient is of utmost importance.
Bring the machine near the patient.
Switch on the machine.
Put the hand probe vibration point at the desired foot point and increase the power in Volts.
Ask the patient when he/she start feeling the vibrations and press the check button to confirm it.
Once confirmed, record the reading.
Do the same procedure at all the points and record the readings.
At each time the vibration perception threshold is recorded in the format given below, at each point in both feet.

UP to 40 years:

Above 50 years:

•Below 15Volts - Normal
•Between 16 and 20 Volts - Mild Neuropathy (Mild Loss of Sensation)
•Between 21 and 25 Volts - Moderate Neuropathy (Moderate Loss of Sensation)
•Above 25 Volts - Severe Neuropathy (Severe Loss of Sensation)
•This above interpretation is not accepted by all but everyone accepts more than 25 Volts is considered as severe loss of Sensation for all age group termed as abnormal.

Page updated

Google Sites

Report abuse